TP-04 DESCALING PUMP / Power Flushing Machine / Dual Reversible -With Heater
TP-04 DESCALING PUMP / Dual Reversible / with Heater
TECHNICAL DATA | |
Liquid Tank | : 40 liters |
Pressure | : 4 Bar |
Voltage | : 220 Volt / IP55 |
Liquid Flow Rate | : 60 liter/ min. |
Engine Power | : 600 Watt 0.8 Hp |
Heater Resistance | : 2000 Watt |
Reverse Return Valf | : √ |
Weight | : 19 kg |
Dimensions (L x D x H) | : 35cm x 45cm x 75cm |
TORYAP TP-04 İnstallations Cleaning Machine | Two-Way,Dual Reversible| Heater Equipped, you are ensured the perfect cleaning in all areas, from the combi boiler to the cores, from two-storey villas to central system buildings and housings with large installations. The water pumped with the jet pump in TP-04 is very fast and turbulent in flow. Withthe help of the chemical used, the lime or sludge layer on the surface is thinned down by the rapid passing and with each sweep and accumulated in the tank of the machine.
With TP-04 İnstallations Cleaning Machine | Two-Way,Dual Reversible | Heater Equipped, you are ensured the perfect cleaning in all areas, from the combi boiler to the cores, from two-storey villas to central system buildings and housings with large installations.You will not experience performance loss and failures over time from chemicals and sediments in the core cleaning device because the motor used in it is a plastic jet engine. The pump is made from plastic that shows the best durability against chemicals and sediments and as such, you will continue with the performance you had on the first day without ever experiencing any performance loss or reduction in the flowrate and pressure of the machine.
Produse similare
TP-02 DESCALING PUMP / Power Flushing Machine / With Hater
TECHNICAL DATA | |
Liquid Tank | : 40 liters |
Pressure | : 4 Bar |
Voltage | : 220 Volt |
Liquid Flow Rate | : 60 liter/ min. |
Engine Power | : 600 Watt 0.8 Hp |
Heater Resistance | : 2000 Watt |
Reverse Return Valf | : --- |
Weight | : 19 kg |
Dimensions (L x D x H) | : 35cm x 45cm x 75cm |
TP-02 промышленные моющие насосы / С нагревательным элементом / Промывочный насос
Резервуар для жидкости | : 40 Литров |
Рабочее давление | : 4 Бар/ 40 mss |
Расход воды | : 60 Литров / Мин |
Напряжение | : 220 Вольт |
Мощность двигателя | : 600В 0.8 Гц |
Нагревательный элемент | : √ |
Клапан изменения направления | : -- |
Вес | : 19.6 кг |
Размеры (Ш x Г x В) | : 35cm x 45cm x 75cm |
TS-01 DESCALING PUMP
Tank Volume | : 20 lt. |
Flow rate | : 50 l/min |
Max working pressure | : 4 bar |
Max temperature | : 60°C |
Motor output | : 0.37 kW/0,50 HP |
Heating coil | : 1500 watt |
Thermometer | : √ |
Pressure indicator | : √ |
Weight | : 16 kg |
Dimensions : hxwxd | : 85x35x35 |
IP:55 |
Резервуар для жидкости | : 20 Литров |
Рабочее давление | : 4 Бар |
Расход воды | : 50 Литров / Мин |
Напряжение | : 220 Вольт |
Мощность двигателя | : 0,37 кВт |
Нагревательный элемент | : 1500 Вт |
Клапан изменения направления | : -- |
Вес | : 16 кг |
Размеры (Ш x Г x В) | : 85cm x 35cm x 35cm |
PA15-17 INDUSTRIAL DESCALING PUMP
PA15-17 INDUSTRIAL DESCALING SYSTEM Installations Flushing Machine WITH ACID CLEANING SYSTEM / POWER FLUSHING MACHINE | ||
Engine | : 0,75 Kw-2800 d/dk. 220V (Mono-Phase) | |
Pump Pressure | : 1,2 Bar | |
Pump Fluid | : Max: 15 mSS – 1 m³/h Min: 1 mSS – 8 m³/h | |
Output Size | : Output: 2 x 25 mm Ball Valve Acid | |
İnput Size | : Input: 2 x 1''Hose Connection | |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter | |
Shaft | : 316 Quality Stainles Steel | |
Spesification | : Closed Impeller | |
Material Type | : PP. Polypropylene | |
Temperature | : Max. 70ºC | |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug | |
Suitable for use on wheels with brakes through the wheels | ||
Convenient Transportation and push the right and left grip Handles | ||
Pressure gauge | ||
Relief for the Lower Section of Tank Relief Valve | ||
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, and chemicals,central heating sys, it is used as Scab Removal Unit | |
It is designed for professional use. |
PA15-17 INDUSTRIAL DESCALING SYSTEM Installations Flushing Machine WITH ACID CLEANING SYSTEM / POWER FLUSHING MACHINE | ||
Engine | : 0,75 Kw-2800 d/dk. 220V (Mono-Phase) | |
Pump Pressure | : 1,2 Bar | |
Pump Fluid | : Max: 15 mSS – 1 m³/h Min: 1 mSS – 8 m³/h | |
Output Size | : Output: 2 x 25 mm Ball Valve Acid | |
İnput Size | : Input: 2 x 1''Hose Connection | |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter | |
Shaft | : 316 Quality Stainles Steel | |
Spesification | : Closed Impeller | |
Material Type | : PP. Polypropylene | |
Temperature | : Max. 70ºC | |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug | |
Suitable for use on wheels with brakes through the wheels | ||
Convenient Transportation and push the right and left grip Handles | ||
Pressure gauge | ||
Relief for the Lower Section of Tank Relief Valve | ||
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, and chemicals,central heating sys, it is used as Scab Removal Unit | |
It is designed for professional use. |
ПРОМЫШЛЕННАЯ КИСЛОТНАЯ СИСТЕМА ОЧИСТКИ | ||
PA15-17 INDUSTRIAL DESCALING SYSTEM / Chemical Power Flushing | ||
Мощность/ марка двигателя | : | 0,75 кВт-2800 об./мин. 220 В |
Давление | : | 1,2 Бар |
Скорость потока | : | Mакс.: 15 мСС – 1 м³/ч Мин.: 1 мСС – 8 м³/ч |
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров |
Размер выхода | : | Выход : 2 ед. 25 мм шаровой кислотный клапан |
Размер входа | : | Вход : 2 ед. 25 мм шаровой кислотный клапан |
Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей |
Вал насоса | : | Нержавеющая сталь 316 İnox |
Тип вентилятора | : | Закрытый вентилятор |
Тип материала | : | PP. Полипропилен |
Рабочая температура | : | Макс. 60ºC |
Электрический выключатель + 5 метровый кабель с вилкой | ||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара. | |
Области применения | ||
Пригоден для очистки с помощью ингибиторной кислоты и химических веществ пресс-форм для литья под давлением, теплообменников, модули очистки извести и отложений. Предназначен для профессионального использования. |
P15-17 INDUSTRIAL DESCALING PUMP
Engine | : 0,75 Kw-2800 d/dk. 220V (Mono-Phase) | |
Pump Pressure | : 1,2 Bar | |
Pump Fluid | : Max: 15 mSS – 1 m³/h Min: 1 mSS – 8 m³/h | |
Output Size | : Output: 2 x 25 mm Ball Valve Acid | |
İnput Size | : Input: 2 x 1''Hose Connection | |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter | |
Shaft | : 316 Quality Stainles Steel | |
Spesification | : Closed Impeller | |
Material Type | : PP. Polypropylene | |
Temperature | : Max. 70ºC | |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug | |
Suitable for use on wheels with brakes through the wheels | ||
Convenient Transportation and push the right and left grip Handles | ||
Pressure gauge Relief for the Lower Section of Tank Relief Valve | ||
Where To Use | :Injection molding machine heat exchanger with acid inhibitors, and chemicals,Central Heting syst. it is used as Scab Removal Unit It is designed for professional use. | |
Engine | : 0,75 Kw-2800 d/dk. 220V (Mono-Phase) | |
Pump Pressure | : 1,2 Bar | |
Pump Fluid | : Max: 15 mSS – 1 m³/h Min: 1 mSS – 8 m³/h | |
Output Size | : Output: 2 x 25 mm Ball Valve Acid | |
İnput Size | : Input: 2 x 1''Hose Connection | |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter | |
Shaft | : 316 Quality Stainles Steel | |
Spesification | : Closed Impeller | |
Material Type | : PP. Polypropylene | |
Temperature | : Max. 70ºC | |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug | |
Suitable for use on wheels with brakes through the wheels | ||
Convenient Transportation and push the right and left grip Handles | ||
Pressure gauge Relief for the Lower Section of Tank Relief Valve | ||
Where To Use | :Injection molding machine heat exchanger with acid inhibitors, and chemicals,Central Heting syst. it is used as Scab Removal Unit It is designed for professional use. | |
Мощность | : | 0,75 кВт-2800 об./мин. 220 В |
Давление | : | 1,2 Бар |
Скорость потока | : | Mакс.: 15 мСС – 1 м³/ч Мин.: 1 мСС – 8 м³/ч |
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров |
Размер выхода | : | Выход : 2 ед. 25 мм шаровой кислотный клапан |
Размер входа | : | Вход : 2 ед. 25 мм шаровой кислотный клапан |
Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей |
Вал насоса | : | Нержавеющая сталь 316 İnox |
Тип вентилятора | : | Закрытый вентилятор |
Тип материала | : | PP. Полипропилен |
Рабочая температура | : | Макс. 60ºC |
Электрический выключатель + 5 метровый кабель с вилкой | ||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара. | |
Области применения | ||
Пригоден для очистки с помощью ингибиторной кислоты и химических веществ пресс-форм для литья под давлением, теплообменников, модули очистки извести и отложений. Предназначен для профессионального использования. |
PA25-17 INDUSTRIAL DESCALING PUMP
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, central heating sys.and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, central heating sys.and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
ПРОМЫШЛЕННАЯ КИСЛОТНАЯ СИСТЕМА ОЧИСТКИ | ||
PA25-17 INDUSTRIAL DESCALING SYSTEM / Chemical Power Flushing | ||
Мощность/ марка двигателя | : | 1,5 кВт-2800 об./мин. 220 В |
Давление | : | 2,2 Бар |
Скорость потока | : | Mакс.: 25 мСС – 1 м³/ч Мин.: 4 мСС – 19 м³/ч |
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров |
Размер выхода | : | Выход : 2 ед. 25 мм шаровой кислотный клапан |
Размер входа | : | Вход : 2 ед. 25 мм шаровой кислотный клапан |
Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей |
Вал насоса | : | Нержавеющая сталь 316 İnox |
Тип вентилятора | : | Закрытый вентилятор |
Тип материала | : | PP. Полипропилен |
Рабочая температура | : | Макс. 60ºC |
Электрический выключатель + 5 метровый кабель с вилкой | ||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара. | |
Области применения | ||
Пригоден для очистки с помощью ингибиторной кислоты и химических веществ пресс-форм для литья под давлением, теплообменников, модули очистки извести и отложений. Предназначен для профессионального использования. |
TM-02 POMPE SPALARE CHIMICA INSTALATII / DESCALING PUMP /șaibă bidirecțională
Tank capacity | : 17 liters |
Flow rate | : 50 l/min |
Max working pressure | :1,5 bar |
Motor output: | : 0,55 Kw |
Max temperature of the system | : 60° |
Weight | : 15 kg |
Reverse Return Valve | : √ |
Dimensions : hxwx | :31x36x24 |
IP 55 |
-
Насосы для промывки теплообменников
Резервуар для жидкости | : 15 Литров |
Рабочее давление | : 1,5 Бар |
Расход воды | : 60 Литров / Мин |
Напряжение | : 220 Вольт |
Мощность двигателя | : 0,37 кВт |
Нагревательный элемент | : -- |
Клапан изменения направления | : √ |
Вес | : 15 кг |
Размеры (Ш x Г x В) | : 31cm x 36cm x 24cm |