TS-01 DESCALING PUMP
TS-01 DESCALING PUMP / With Heater
Technical Data :
Tank Volume | : 20 lt. |
Flow rate | : 50 l/min |
Max working pressure | : 4 bar |
Max temperature | : 60°C |
Motor output | : 0.37 kW/0,50 HP |
Heating coil | : 1500 watt |
Thermometer | : √ |
Pressure indicator | : √ |
Weight | : 16 kg |
Dimensions : hxwxd | : 85x35x35 |
IP:55 |
DESIGN:
Easy to carry
17 lt. Plastic liquid tank Carrying handle
2 Heat-resistant water hoses, each with 2 m length 3/4” screw connection hose,
Cleaning cover
One piece heat and pressure gauge 2 sturdy castors for easy carrying
Central heating systems Solar heating systems,
1 pcs. Filter
Transfer Fluids:
heat transfer liquids, antifreeze, water, aqueous solutions, emulsions,chemical protectors
Usage areas:
Solar energy systems
All mechanical installations Radiators
boilers
Categorie: TORYAP MACHINERY POMPE DE SPALARE CHIMICA
Produse similare
AIRPULSE-02 Compresor pentru curatare, testare si incarcare instalatii termice
[:en]AIRPULSE-02 POWER FLUSHING COMPRESSOR /
СФЕРЫ ПРИМЕНЕНИЯ
Можно легко использоваться для очистки отопительных и конденсационных котлов; алюминиевых, литых и панельных радиаторов; железных, медных, пластиковых труб; систем напольного панельного отопления.
ОБЩИЕ ХАРАКТЕРИСТИКИ
В комплект входят 3 шланга длиной 200 см, 1 шланг с соединительной муфтой диаметром 3/4 дюйма длиной 3,50 см. В отличие от машин с циркуляцией воды, это оборудование может выполнять более контролируемую и эффективную очистку благодаря возможности регулировки давления. Для его работы не требуется высокий напор воды, поэтому оно может использоваться в каждой квартире, даже там, где напоре воды небольшой. С ним уборка будет легкой и качественной, потому что данное оборудование очень простое в использовании, не требует применения моющих средств, во время работы не выбрасывает воздух.
[:]
Compresor pentru curatare, testare si incarcare instalatii termice
TECHNICAL DATA:
Air tank volume | : 9 litres |
Flow rate | : 110 l/min |
Max working pressure | : 8 Bar/115psi |
Motor output | : 0.75 kW/1HP |
Pressure indicator | : √ |
Pressure control indicator | : √ |
Pressure control valve | : √ |
Flow reverser valve | : -- |
Pulse mode | : √ |
Oil-less compressor | : √ |
Dry piston compressor | : √ |
Ultra Silent compressor | : 42 dB |
Noise level | : 18 kg |
Dimensions : hxwxd | : 47x25x55 |
USAGE AREAS:
Powerful electric filling and flushing unit for fast, easy flushing with pulse of closed systems.
Ideal for boilers, radiators, underfloor/wall heating systems and solar heating systems.
DESIGN SPECIFICATIONS:
Powerful, electric filling and flushing unit on stable, mobile tubular steel frame for secure standing.1 HP, on/off switch.
Double piston, high transport volume 110 l/min for fast filling and pulse mode for
efficient flushing of closed systems and for filling tanks.
Dual reversible flow valve for changing direction of liquid running in system.
With proven, powerful condenser motor with quiet running,
4 pieces flexible, transparent PVC fabric hoses ½”T60, for pressure and return
lines, each 2 m long, with ¾” hose screw fittings, temperature-resis-tant ≤ 60°C.
connections run smoothly.
[:ro]AIRPULSE-02 POWER FLUSHING COMPRESSOR
TECHNICAL DATA:
Air tank volume | : 9 litres |
Flow rate | : 110 l/min |
Max working pressure | : 8 Bar/115psi |
Motor output | : 0.75 kW/1HP |
Pressure indicator | : √ |
Pressure control indicator | : √ |
Pressure control valve | : √ |
Flow reverser valve | : -- |
Pulse mode | : √ |
Oil-less compressor | : √ |
Dry piston compressor | : √ |
Ultra Silent compressor | : 42 dB |
Noise level | :19 kg |
Dimensions : hxwxd | : 47x25x55 |
USAGE AREAS:
Powerful electric filling and flushing unit for fast, easy flushing with pulse of closed systems.
Ideal for boilers, radiators, underfloor/wall heating systems and solar heating systems.
DESIGN SPECIFICATIONS:
Powerful, electric filling and flushing unit on stable, mobile tubular steel frame for secure standing.1 HP, on/off switch.
Double piston, high transport volume 110 l/min for fast filling and pulse mode for
efficient flushing of closed systems and for filling tanks.
Dual reversible flow valve for changing direction of liquid running in system.
With proven, powerful condenser motor with quiet running,
4 pieces flexible, transparent PVC fabric hoses ½”T60, for pressure and return
lines, each 2 m long, with ¾” hose screw fittings, temperature-resis-tant ≤ 60°C.
connections run smoothly.
[:ru]AIRPULSE-02 Промывочный Компрессор
Максимальное рабочее давление | : 8 бар |
Поток | : 90 л/мин |
Двигатель | : 0.75 кВт/1 л.с. |
Объем воздушного резервуара | : 9 литров |
Манометр | : √ |
Индикатор контроля давления | : √ |
Клапан регулировки давления | : √ |
Режим импульсной очистки | : √ |
Безмасляный компрессор | : √ |
Клапан изменения направления | : -- |
Сверхтихий компрессор | : √ |
Уровень звука | : 42 Дб |
Масса | : 18 кг |
Габариты hxwxd | : 47x25x55 |
TM-01 DESCALING PUMP
[:en][:ro]TM-01 DESCALING PUMP
Сферы применения:
Используется для очистки работающих установок (оборудования), как например: отопительных и конденсационных котлов (марка модели не имеет значения); алюминиевых, литых и панельных радиаторов; железных, медных, пластиковых труб; для очистки теплообменника; закрытой системы. В зависимости от спецификации машины, сферы применения могут меняться. В комплект входят два шланга для воды диаметром 3/4 дюйма с соединительной муфтой
[:]
TEKNICAL DATA
Tank capacity | : 17 liters |
Flow rate |
: 50 l/min |
Max working pressure |
:1,5 bar |
Motor output: |
: 0,55 Kw |
Max temperature of the system |
: 60° |
Weight |
: 15 kg |
Dimensions : hxwx |
:31x36x24 |
IP 55 |
USAGE AREAS Ideal for;
Radiators -Boilers-Heat exchangers /wall heating systems -Central heating systems-Solar heating systems
DESIGN
Easy to carry 17 lt. Plastic liquid tank
Carrying handle
2 Heat-resistant water hoses, each with 2 m length 3/4 screw connection hose,
Cleaning cover
[:ru]TM01 Насос для промывки систем отопления / Промывочный насос
промышленные моющие насосы / Промывочный насос
-
Насосы для промывки теплообменников
Резервуар для жидкости | : 17 Литров |
Рабочее давление | : 1,5 Бар |
Расход воды | : 60 Литров / Мин |
Напряжение | : 220 Вольт |
Мощность двигателя | : 0,37 кВт |
Нагревательный элемент | : -- |
Клапан изменения направления | : -- |
Вес | : 15 кг |
Размеры (Ш x Г x В) | : 31cm x 36cm x 24cm |
ESM PLASTER MACHINES T8
Definition of T8
It mixes and pumps the powder mortar and water suitable for all kinds of machines.
It is innovative and powerful model for interior and exterior applications.
ESM T8 gypsum plaster machine is the most preffered model by experts esm is a ready-to-use plastering machine which mixes all kinds of dry mix materials on gypsum or cement basis continuously and fully automatically in a homogeneous state.
PROPERTIES
Easy to handle water armatüre
suitable for D and R sorts of pumps
wide tool box
fully automatic compressor and water engine shutdown and single run principle
technical data
TECHNICAL INFORMATION
Product Code : ESM T8
Carrying Capacity:25-30 lt/ per min
Carrying Height: 30 M.
Pump Motor : 5.5 KW 400 V
Mill Motor : 0.55 KW 400 V Compressor Capacity : 220 L/MİNS
Water Pressure : 3 BAR
Voltage : 400 V 50 HZ
FEATURES
Pump: D6-3 TWİSTER
SPRAY GUN: LONG DN-25
Mortar and Air Hose: 15 M.
Mixing Shaft : THERE IS
Control Board : 42 V.
Cleaning set : THERE IS
Compressor : THERE IS
Power cord : 50 M.
(English) TM-03 DESCALING PUMP / POWER FLUSHING MACHINE / Dual Reversible & Uni Flow Optional
[:en]
TM-03 KİREÇ ÇÖZME POMPASI / GÜÇLÜ YIKAMA ÜNİTESİ / çift ters çevrilebilir ve Uni Flow Opsiyonel
TEKNİK VERİ
Sıvı Tankı : 24 litre
Basınç : 1,5 Bar
Sıvı Debisi : 60 lt/dk.
Voltaj : 220 Volt / IP 55
Motor Gücü : 370 Watt
Ağırlık : 15 kg
Boyutlar (U x G x Y): 25cm x 20cm x 30cm
TM-03 tesisat temizleme makinesi ile kombiden peteklere kadar her alanda kusursuz temizlik iki katlı villalardan merkezi sistem binalara ve büyük konutlara kurulumlar. TM-03'te jet pompası ile pompalanan su çok yüzeydeki hızlı ve türbülanslı kireç veya çamur tabakası, hızlı incelme ile inceltilir. geçen ve her süpürmede ve makinenin tankında biriken. TM-03 tesisat temizleme makinesi ile kombiden peteklere, iki katlı villalardan merkezi sistem bina ve büyük tesisatlı konutlara kadar tüm alanlarda kusursuz temizlik sağlanır.Performans kaybı ve arızaları yaşamazsınız. Kullanılan motor plastik jet motoru olduğu için çekirdek temizleme cihazında zamanla kimyasallardan ve tortulardan arındırılır. Pompa, kimyasallara ve tortulara karşı en iyi dayanıklılığı gösteren plastikten yapılmıştır ve bu sayede herhangi bir performans kaybı ya da azalma yaşamadan gün içindeki performansınıza devam edeceksiniz. SİPARİŞLER İÇİN 8- OPSİYONEL SEÇİMLER * tek yönlü akış * ters valfli * ısıtıcılı / tek yönlü akışlı * filtreli / tek yönlü akışlı * ısıtıcı & filtreli / tek yönlü akışlı * ısıtıcılı / Ters akış valfli * filtreli / Ters akış valfli * ısıtıcı ve filtreli /Ters akış valfli Manyetik Filtre Su hortumları seti Akış ters valfi / tek akış seçenekleri Isıtıcı Rezistansı Ayarlanabilir : 1500 Watt Geri Dönüş Valfi : √ Tek Akış Seçeneği : √ [:ro]TM-03 DESCALING PUMP / POWER FLUSHING UNIT / dual reversible & Uni Flow Optional
TECHNICAL DATA
Liquid Tank : 24 liters
Pressure : 1,5 Bar
Liquid Flow Rate : 60 lt/ min.
Voltage : 220 Volt / IP 55
Engine Power : 370 Watt
Weight : 15 kg
Dimensions (L x W x H) : 25cm x 20 cm x 30cm
With the TM-03 installation cleaning machine, you are ensured the perfect cleaning in all areas, from the combi boiler to the cores, from two-storey villas to central system buildings and housings with large installations. The water pumped with the jet pump in TM-03 is very fast and turbulen lime or sludge layer on the surface is thinned down by the rapid passing and with each sweep and accumulated in the tank of the machine. With the TM-03 installation cleaning machine, you are ensured the perfect cleaning in all areas, from the combi boiler to the cores, from two-storey villas to central system buildings and housings with large installations.You will not experience performance loss and failures over time from chemicals and sediments in the core cleaning device because the motor used in it is a plastic jet engine. The pump is made plastic that shows the best durability against chemicals and sediments and as such, you will continue with the performance y day without ever experiencing any performance loss or reduc 6 FOR ORDERS 8- OPTIONAL SELECTIONS * uni way flow * with reverse valve * with heater / one way flow * with filter / one way flow * with heater & filter / one way flow * with heater / Reverse flow valve * with filter / Reverse fow valve * with heater & filter /Reverse flow valve Magnetic Filter Water hoses set Flow reverse valve / uni flow options Heater Resistance Setable : 1500 Watt Reverse Return Valf : √ Uni Flow Option : √ [:ru]TM-03 Насос для промывки систем отопления / Промывочный насос
промышленные моющие насосы /Насосы для промывки теплообменников /двунаправленная очистка /Промывочный насос
ТЕХНИЧЕСКИЕ ДАННЫЕ
Жидкостный бак : 24 литра Давление : 1,5 бар Расход жидкости : 60 л / мин. Напряжение : 220 Вольт / IP 55 Мощность двигателя : 370 Вт Вес : 15,5 кг Размеры : 40 см х 60 см х 55 см Магнитный фильтр : √ Комплект водяных шлангов: √ двунаправленный клапан : √ Сопротивление нагревателя Setable : 1500 Вт ВЫБОР 8 ВАРИАНТОВ * односторонний поток * с двунаправленным клапаном потока * с нагревателем / односторонним потоком * с фильтром / односторонним потоком * с нагревателем и фильтром / односторонний поток * с нагревателем / с двунаправленным клапаном потока * с фильтром /с двунаправленным клапаном потока * с нагревателем и фильтром / с двунаправленным клапаном потока [:]PA25-17 INDUSTRIAL DESCALING PUMP
[:en]PA25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
[:ro]PA25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
[:ru]
[:]
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, central heating sys.and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, central heating sys.and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
ПРОМЫШЛЕННАЯ КИСЛОТНАЯ СИСТЕМА ОЧИСТКИ | ||
PA25-17 INDUSTRIAL DESCALING SYSTEM / Chemical Power Flushing | ||
Мощность/ марка двигателя | : | 1,5 кВт-2800 об./мин. 220 В |
Давление | : | 2,2 Бар |
Скорость потока | : | Mакс.: 25 мСС – 1 м³/ч Мин.: 4 мСС – 19 м³/ч |
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров |
Размер выхода | : | Выход : 2 ед. 25 мм шаровой кислотный клапан |
Размер входа | : | Вход : 2 ед. 25 мм шаровой кислотный клапан |
Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей |
Вал насоса | : | Нержавеющая сталь 316 İnox |
Тип вентилятора | : | Закрытый вентилятор |
Тип материала | : | PP. Полипропилен |
Рабочая температура | : | Макс. 60ºC |
Электрический выключатель + 5 метровый кабель с вилкой | ||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара. | |
Области применения | ||
Пригоден для очистки с помощью ингибиторной кислоты и химических веществ пресс-форм для литья под давлением, теплообменников, модули очистки извести и отложений. Предназначен для профессионального использования. |
PR25-17 INDUSTRIAL DESCALING PUMP
[:en]PR25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
[:ro]PR25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
[:ru]
[:]
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Resıstance features | : Titanium outer pipe Wires made of porcelain resistance Heat resistant plastic protection cover Electrical components : 3000watt – 220 v - power |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
: Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors,central heating sys. and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Resıstance features | : Titanium outer pipe Wires made of porcelain resistance Heat resistant plastic protection cover Electrical components : 3000watt – 220 v - power |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
: Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors,central heating sys. and chemicals, it is used as Scab Removal Unit |
It is designed for professional use. |
Модель | : | ПРОМЫШЛЕННАЯ КИСЛОТНАЯ СИСТЕМА ОЧИСТКИ PR25-17 INDUSTRIAL DESCALING SYSTEM / Chemical Power Flushing | ||
Мощность/марка двигателя | : | 1,5 кВт-2800 об./мин. 220 В | ||
Давление | : | 2,2 Бар | ||
Скорость потока | : | Mакс.: 25 мСС – 1 м³/ч Мин.: 4 мСС –19 м³/ч | ||
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров | ||
Размер выхода | : | Вход : 2 ед. 32 мм шаровой кислотный клапан | ||
Размер входа | : | Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей | ||
Вал насоса | : | Нержавеющая сталь 316 İnox | ||
Тип вентилятора | : | Закрытый вентилятор | ||
Тип материала | : | PP. Полипропилен | ||
Рабочая температура | : | Макс. 70ºC | ||
Электрический выключатель + 5 метровый кабель с вилкой | ||||
НАГРЕВАТЕЛЬНОЕ СОПРОТИВЛЕНИЕ | : | ИМЕЕТСЯ | ||
Наружная труба из титана | ||||
Фарфоровые клеммные колодки | ||||
Защитная крышка из термостойкого пластика | ||||
Электрические элементы: 3000 Вт - 220 В - электропитание | ||||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | : | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара.
|
P25-17 INDUSTRIAL DESCALING PUMP
[:en]
[:ro]P25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
[:ru]25-17 INDUSTRIAL DESCALING SYSTEM / Chemical Power Flushing /ПРОМЫШЛЕННАЯ КИСЛОТНАЯ СИСТЕМА ОЧИСТКИP
[:]
P25-17 INDUSTRIAL DESCALING SYSTEM / Installations Flushing Machine
Engine |
: 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure |
: 2,2 Bar |
Pump Fluid |
: Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size |
: Output: 2 x 32 mm Ball Valve Acid |
İnput Size |
: Input: 2 x 1''Hose Connection |
Tank Size / Volume |
: 650 x 500 x 500 mm / 160 Liter |
Shaft |
: 316 Quality Stainles Steel |
Spesification |
: Closed Impeller |
Material Type |
: PP. Polypropylene |
Temperature |
: Max. 70ºC |
Tank Equipment |
: Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels |
|
Convenient Transportation and push the right and left grip Handles |
|
Pressure gauge |
|
Relief for the Lower Section of Tank Relief Valve |
|
Where To Use |
: Injection molding machine heat exchanger with acid inhibitors, and chemicals,Central heating stsyems,Plumbings, it is used as Scab Removal Unit |
It is designed for professional use. |
Engine | : 1.5 Kw-2800 d/dk. 220V (Mono-Phase) |
Pump Pressure | : 2,2 Bar |
Pump Fluid | : Max: 25 mSS – 1 m³/h Min: 4 mSS – 19 m³/h |
Output Size | : Output: 2 x 32 mm Ball Valve Acid |
İnput Size | : Input: 2 x 1''Hose Connection |
Tank Size / Volume | : 650 x 500 x 500 mm / 160 Liter |
Shaft | : 316 Quality Stainles Steel |
Spesification | : Closed Impeller |
Material Type | : PP. Polypropylene |
Temperature | : Max. 70ºC |
Tank Equipment | : Electrical Switch + 5 Meter.elektrik Cables and Plug |
Suitable for use on wheels with brakes through the wheels | |
Convenient Transportation and push the right and left grip Handles | |
Pressure gauge | |
Relief for the Lower Section of Tank Relief Valve | |
Where To Use | : Injection molding machine heat exchanger with acid inhibitors, and chemicals,Central heating stsyems,Plumbings, it is used as Scab Removal Unit |
It is designed for professional use. |
Мощность | : | 1,5 кВт-2800 об./мин. 220 В |
Давление | : | 2,2 Бар |
Скорость потока | : | Mакс.: 25 мСС – 1 м³/ч Мин.: 4 мСС – 19 м³/ч |
Размер/объем резервуара | : | 650 x 500 x 500 мм / 160 литров |
Размер выхода | : | Выход : 2 ед. 25 мм шаровой кислотный клапан |
Размер входа | : | Вход : 2 ед. 25 мм шаровой кислотный клапан |
Вход : 2 ед. 1’’ шланговое соединение | ||
Тип уплотнения | : | Комплект механических уплотнителей |
Вал насоса | : | Нержавеющая сталь 316 İnox |
Тип вентилятора | : | Закрытый вентилятор |
Тип материала | : | PP. Полипропилен |
Рабочая температура | : | Макс. 60ºC |
Электрический выключатель + 5 метровый кабель с вилкой | ||
ОБОРУДОВАНИЕ РЕЗЕРВУАРА | Благодаря колесам с тормозным механизмом пригоден для передвижения, манометр управления давлением, удобные рукоятки с правой и левой стороны для переноски и толкания, расположенный в нижней части, предохранительный клапан для откачки жидкости из резервуара. | |
Области применения | ||
Пригоден для очистки с помощью ингибиторной кислоты и химических веществ пресс-форм для литья под давлением, теплообменников, модули очистки извести и отложений. Предназначен для профессионального использования. |